Slick 60's

i have a 62 with stock rims and the stock center caps wont clear the dust caps. what center caps can i run if any? any one else have this prob?

Re-edit: Sorry, I didn't realize you said disc brakes. Usually the problem is that the original "innie" wheels rub on the disc brake caliper, which can be fixed with a 3/8" spacer to move the wheel out a bit. Maybe that would solve your problem. All the disc brake kits I've seen for the straight axle trucks use the original spindles so the length should remain the same.

would the 4x4 inny caps fit?

dan has had the same problem. pm cdherman and see if he has any suggestions.

i have a 62 with discs. These are ford rims remake from summit 5x4.5 witht he 42 ford cap. not sure if this helps

I don't understand the problem -- 61 disc brake conversions usually use the old spindles. So the "bottle cap" style original hub capss should still work.

Now, perhaps someone dropped a whole different front end in there??

Does this truck have independant suspension?

Are you sure these are stock rims? Are they very narrow? 16"? I think (never have verfied) that the old 16" rims will bolt on to a 5x5.5 hub fine, but they are shallower and the hub caps may not fit. Just a thought.