Chevy Trucks

BackyardRest · Post by **BackyardRest** » October 1, 2010, 1:53 am

A while back

MY OL 66 · Post by **MY OL 66** » October 1, 2010, 7:37 am

I think I would be interested in a white one.

Does $20 plus shipping seem reasonable?

Thank you.

BackyardRest · Post by **BackyardRest** » October 1, 2010, 9:19 am

[quote="MY OL 66"]

jglee · Post by **jglee** » October 1, 2010, 9:28 am

Sign me up at the prices you're talking about. Thanks!

slickmainer · Post by **slickmainer** » October 1, 2010, 9:38 am

any photos of what they look like or dimensions so i know if it will cover my garage door hole

BackyardRest · Post by **BackyardRest** » October 1, 2010, 10:11 am

[quote="slickmainer"]

banjopicker66 · Post by **banjopicker66** » October 1, 2010, 10:17 am

That is sweet!
What about a version with the original holes to re-install an original radio in your plate?
Not perfectly original, I know, but a very nice substitute!
To hold the radio, of course, it would have to welded or screwed to the original dash. I would prefer the screws, personally.

BackyardRest · Post by **BackyardRest** » October 1, 2010, 1:24 pm

[quote="banjopicker66"]

MadMaxetc · Post by **MadMaxetc** » October 1, 2010, 9:23 pm

If you wanted you could bond (glue) some of these...
http://www.electricalhub.com/click-bond ... nded-studs
on the back and then make a peice to span the dash hole and bolt up to the studs.

This would get rid of the scews on the front of any welding.

MadMaxetc · Post by **MadMaxetc** » October 1, 2010, 9:25 pm

Here is the glue...

http://www.electricalhub.com/click-bond ... -adhesives

Johnny Canuck · Post by **Johnny Canuck** » October 1, 2010, 9:27 pm

BackyardResto wrote:

The glare in lower left of pic makes it look a bit weird but its actually fine.

just needs one little enhancement

Troublemaker427 · Post by **Troublemaker427** » December 3, 2010, 8:12 am

I'll take one..

azjake · Post by **azjake** » December 3, 2010, 8:23 am

I am interested.

For some reason, I am unable to see the photos on this thread.

Jake

Troublemaker427 · Post by **Troublemaker427** » December 16, 2010, 12:06 pm

Still interested...

BackyardRest · Post by **BackyardRest** » December 16, 2010, 6:38 pm

[quote="Troublemaker427"]

Troublemaker427 · Post by **Troublemaker427** » December 16, 2010, 6:50 pm

Wow, that looks great!!

jhewitt · Post by **jhewitt** » December 25, 2010, 12:01 pm

Both of my trucks the previous igmo cut up INTO the bend line of the dash ABOVE the radio hole, you got any suggestions/fixes for that?

qwertyd10n · Post by **qwertyd10n** » December 26, 2010, 12:33 pm

Check this post out... my hole didn't go up into the bend in the dash, but it went down far enough and towards the instrument cluster far enough that I had to "massage" the aluminum plate I made to conform to the curves. I would think it should work the same to match the curves going upwards...

http://fordtruk.com/forums/viewtopic.php?t=19749

Cheers,
Dion

Troublemaker427 · Post by **Troublemaker427** » March 7, 2011, 8:00 am

Are these going to be available?

TonyC · Post by **TonyC** » March 7, 2011, 8:45 am

Troublemaker427 wrote:Are these going to be available?

I would love to know as well...

Chevy Trucks

Chevy Trucks

Radio block off plate

Re: Radio block off plate

i WOULD DEFINATELY WANT A COUPLE bbuuuuuuuttttttttt!!!!!!!!!