Slick 60's

Been workin on the Y Block all winter and is finally almost back together, Got to finish painting the block and set valve lash next week and I should be ready to hear it roar back to life again. Bored it out .060, got block decked line honed and cleaned up. Moly rings, new pistons and bearings. Isky F-300 cam and lifters, New valves. Had heads surfaced. new valve springs. Ported heads. Painting it up with a nice new coat of gloss black paint, red on valve covers. Will post pictures once I get paint all finished. Cant wait to bring it down to next SS again with a motor that will actually hold together in one piece this time

Timmaaaaaaay come to the dark side did ya get the blower pistons for it . Dont worry about that big hole in the hood we can fill it with an 8-71 and a couple of fat 4 holers and a nasty scoop .


Rick

Timmaaaaaaaaaay is the top chopped yet .


Rick

Good news is it ran on test bench for a few minutes. Bad news broke a few of the old rockers. Waiting on my new 1.54 stock rockers and new shafts to hopefully fix the last of the bugs. Shakes real good at idle, was well worth all the work. Hope to get some pix or a video of it running.