Two slicks making me drool on EBAY

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Kid, Casey 65

Post Reply
Bill W
Posts: 1166
Joined: December 26, 2007, 1:32 pm
Location: Tucson AZ.

Post by Bill W »

the black truck is nice, but i dont like the way the shocks on the rear are setup.
BarnieTrk
Posts: 1448
Joined: July 11, 2007, 2:37 pm
Location: Stanton, Michigan

Post by BarnieTrk »

I agree, Bill, the black one is my favorite of the two as well.
But I about spit my iced tea out when I saw the selling price was up over 18K$!

Yeah, it's nice........but not that nice to me!

BarnieTrk :shock:
rickairmedic
Posts: 1394
Joined: July 19, 2006, 9:27 pm
Location: Louisville,Ky

Post by rickairmedic »

I like the black one although the " black and red rat rod thing "has gotten very old to me . I still prefer it over the fauxtina nonsense on the blue one .


Rick
if it aint broke fix it till it is :D
dragginwagon
Posts: 254
Joined: May 27, 2008, 2:10 pm
Location: tn

Post by dragginwagon »

the black one was built by brian (unilow) on here. he sold it last year and it looks the same with new pinstripping...
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

i like the blue and white one.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Post by Alan Mclennan »

I like both of them, although he botched the faded look!, go and look at trucks that have it before putting wear spots that don`t make sense!, I see both of them have the same rear shock treatment!
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
BarnieTrk
Posts: 1448
Joined: July 11, 2007, 2:37 pm
Location: Stanton, Michigan

Post by BarnieTrk »

Regarding the blue & white rat rod: "THE TRANY IS A TRANSOMATIC 3 SPD"

Is the seller just trying to say that it has a 3-speed automatic transmission?
I'd guess a C-4 behind that 351 Windsor....

BarnieTrk :?
f100jim
Posts: 645
Joined: January 17, 2009, 6:54 pm
Location: Asheboro, N.C.
United States of America

Post by f100jim »

So let me get this straight, the blue/white truck had a good paint job and he water sanded the paint off to make it look like it needed painting ?...O...K...
User avatar
Hookedtrout
Posts: 797
Joined: February 9, 2011, 8:02 pm
Location: Southeast Idaho

Post by Hookedtrout »

Both trucks are pretty nice, I like the black one best and even though the black and red things has been done a lot I like it, there's probably a reason it's done a lot, it looks awesome. I may even do mine black satin for awhile, lot's to do though so who knows where it'll end up. Both of them are way nicer than mine, for now and maybe forever.
Cory

1962 F100 SWB Unibody, 223
1931 Ford 5 window coupe
1968 GT/California Special Mustang, 289
Complete 61 LWB Unibody parts truck with 292 Y Block
User avatar
Effie
Posts: 756
Joined: November 12, 2007, 10:14 pm
Location: Temple, GA

Post by Effie »

I hadn't seen that black one since it got the graphics and the pinstriping. I kinda like it on the dash, it breaks up all that red.

I had to go back and look at the blue once since ya'll were talking about it soo....doesn't he realize when you "try" to make something look worn, it doesn't really? That's kinda dumb, it would have looked way better if it had been left nice. :roll:
~/\/\elissa~
Image '66 F100 -- Little Black
Image '78 Bronco -- Brutus

Image
User avatar
Shadow
Posts: 1173
Joined: January 6, 2011, 7:19 pm
Location: Topeka Kansas

"Ebay Slicks"

Post by Shadow »

These Are Nice, But Why? Put 20K Into A Ratrod? Isn't The Hole Idea Of A Ratrod To Be A "Low-Buck" Middle Finger To The High Dollar Hot-Rods You See That Are Trailed to The "Good-Guys" Car Shows?... Why Color Sand Through A Nice Paint Job? If I Could Afford A Nice Paint Job My Truck Wouldn't Have Rust On It. "Wimbledon-White Is The New Flat-Black"
f100jim
Posts: 645
Joined: January 17, 2009, 6:54 pm
Location: Asheboro, N.C.
United States of America

Post by f100jim »

Instead of patina, it looks like he was getting the blue/white ready for a new paint job :lol: . I think he realized after he got done,he had goofed up a nice paint job and can't afford to repaint it,so he's going to sell it. :lol: :lol:
truckster
Posts: 215
Joined: June 11, 2010, 8:23 pm
Location: THE COLONY, TEJAS

Post by truckster »

i like the blue and white one. fix that retarded paint and it'll look killer
User avatar
Truckrat
Posts: 2513
Joined: July 27, 2006, 5:06 pm
Location: Oklahoma City, Ok.
United States of America

Post by Truckrat »

Right there with yall on the blue and white one.
Nice clean looking truck and if it were mine I'd repaint the white so it looked right.
Like the stance and all, just not the paint rubbed off. TR
Image
Image
Image
Image
Rest in Peace Cam

65 F100 Flatbed
64 F100 Short Styleside
63 F100 Short Wrongbed
61 Shortbed Uni Parts Truck

    May Angels Fly With You
    Where Ever You Roam
    And Guide You Back Safely
    To Family And Home.
f100jim
Posts: 645
Joined: January 17, 2009, 6:54 pm
Location: Asheboro, N.C.
United States of America

Post by f100jim »

I've never had one of these trucks lowered or rode in a lowered 61-66. Ya'll got my curiosity up . I'd like to go for a ride in one of these lowriders someday to see for myself. How do they ride?Looks like they would handle great. Trouble is I already bump my head on the top of my door opening now sometimes with it setting stock. :lol:
User avatar
Reds Rod Shop
Posts: 317
Joined: January 11, 2009, 6:43 pm
Location: Anderson, SC

Post by Reds Rod Shop »

That Black truck is one of my favorites. Brian Pope (UniFan) Built it. I saw it in person a couple of years ago at the Smokey Mountain F100 Run in Tn. It is sharp from front to rear. I crawled all over the truck and it was like a new one. He's building another under the Projects and Builds. I think its called 6 pack. Its a crew that is laying rocker.
User avatar
foodstick
Posts: 3364
Joined: March 15, 2006, 6:45 pm

Post by foodstick »

I had been just sort of thinking of the eventual finish on my truck, and then I view this thread which sort of parallels a couple of my ideas....

But now I don't know, with the RAGE these to trucks have stirred up !

I want to some how eclipse them and take it to a hair ripping level of fervor never yet achieved ! hahahah ...

My wife thinks panel lines and rivets like a weathered WW2 fighter ;)
User avatar
foodstick
Posts: 3364
Joined: March 15, 2006, 6:45 pm

Post by foodstick »

I had been just sort of thinking of the eventual finish on my truck, and then I view this thread which sort of parallels a couple of my ideas....

But now I don't know, with the RAGE these to trucks have stirred up !

I want to some how eclipse them and take it to a hair ripping level of fervor never yet achieved ! hahahah ...

My wife thinks panel lines and rivets like a weathered WW2 fighter ;)
rickairmedic
Posts: 1394
Joined: July 19, 2006, 9:27 pm
Location: Louisville,Ky

Post by rickairmedic »

Lance heres a preview of your wifes paintjob only on a 55 chebby with a " Merlin motor " :D.

http://www.youtube.com/watch?v=SIj2GVfua84

Rick
if it aint broke fix it till it is :D
Post Reply