I had to share this! video I made !
Posted: October 21, 2013, 10:15 am
This is my sort of kit bashed Sig Senior, It has lite ply sides back past the wing. This allowed me to build in a BIG bomb drop area. One servo runs a power up/down on the bay doors.
The plane was built to be electric powered ..Turnigy 50/55 400 kv,Plush 60 speed control,6 cell 5000 battery ,16/8 prop ! I love it. The top of the nose is removable for the battery, the top of the wing has a hatch to load the drop items. The cowl is a custom built up one from wood scraps.
Some funny facts on how this thing came together.. As a avid builder I ended up with a sig senior kit nobody wanted to build, then over the years I was given one ancient senior wing with bad wingtips (wing had fallen off the club trainer at serious height ! Then a good friend of mine that has since passed (we miss you Don McKenna!) he gave me two senior arf wings from crashed planes. I took the wingtips off the arf wings, and installed them on the OLD kit built wing. A friend had the tails section from a large wrecked 3D Yak, soI cut it down and used that as the fin rudder. I found some lite Baltic Birch ply in my dads barn and used that for the front of the fuse and bomb bay area. I bent up my own landing gear for a old school tail dragger look. The cowl as mentioned was scratched with scrap wood. Another friend got rid of all his old stuff and gave me the fabric covering that I used. There are just so many interesting things about the way it came together !
Anyhow here is the video, we laughed so hard while making it, I hope you guys get a chuckle as well.
The plane was built to be electric powered ..Turnigy 50/55 400 kv,Plush 60 speed control,6 cell 5000 battery ,16/8 prop ! I love it. The top of the nose is removable for the battery, the top of the wing has a hatch to load the drop items. The cowl is a custom built up one from wood scraps.
Some funny facts on how this thing came together.. As a avid builder I ended up with a sig senior kit nobody wanted to build, then over the years I was given one ancient senior wing with bad wingtips (wing had fallen off the club trainer at serious height ! Then a good friend of mine that has since passed (we miss you Don McKenna!) he gave me two senior arf wings from crashed planes. I took the wingtips off the arf wings, and installed them on the OLD kit built wing. A friend had the tails section from a large wrecked 3D Yak, soI cut it down and used that as the fin rudder. I found some lite Baltic Birch ply in my dads barn and used that for the front of the fuse and bomb bay area. I bent up my own landing gear for a old school tail dragger look. The cowl as mentioned was scratched with scrap wood. Another friend got rid of all his old stuff and gave me the fabric covering that I used. There are just so many interesting things about the way it came together !
Anyhow here is the video, we laughed so hard while making it, I hope you guys get a chuckle as well.