Slick 60's

anyone got a picture of the the distribution block just south of the mater cylinder on the side of the frame for the brake lines? just need to see what line goes where? lol

rear of block is back brakes top rear is inlet from mc,bottom rear to rear brakes
front of block is front brakes top front is inlet, other 2 is 1 to each front brake, does not matter which side

my block dont look like that.. ill have to get a picture of mine and yall can tell me then.. mines a 65 f100

well.
the factory block for a 65 f100 with a single pot mc is just a 4 way tee and nothing matters as to what goes where
the one in the pic is for a 4 drum system with dual mc.

mine is just a single pot all orginal

usually the m/c goes into the top hole
the back hole goes back for the rear brakes
and the forward and lower go to the fronts (1 to each side)
that's the way my old 65 was and it just had the 4 way cross tee.
i have another one if yours is messed up. Jeff