Slick 60's

I know I've seen a repair piece for the front of a styleside bed, made to replace the bottom part of the front panel . The piece that seems to rot out on all these trucks. I can't seem to find it in any of my catalogs. Will be calling Tom at Flashback this morning to se if he has it, if he doesn't then I still will need the information. New parts are coming out all the time for these trucks , I will someone would make the front support and repair pieces for the flat corners. The whole front panel would be nice also.

Rich

sOk, I give up. Can't seem to find this piece anywhere. I may have had a brain fart, and was thinking of the patch panel for a flareside bed.

Rich

Some one makes it but I believe it's listed for a bronco if that helps

kelwar wrote:Some one makes it but I believe it's listed for a bronco if that helps

If you remember where you saw it, or think you saw it, please post. Although, I know where this would be used on a bronco, do you?

Rich

Probably too late, but I could find one either so we're having to fab one up. On mine the very bottom 1/4" or so has holes in it. Hopefully it will be done in a week or so. BTW, the portion right behind the front panel is a completely rebuilt Torque Box, which was completely rusted out.

I used the hole bed floor and vertical front panel from a Chevy truck bed I got cheap . Fenders were bent up but the floor was nice. Cut the back of the cab under the belt and installed the front panel and floor. Look like it came that way from Ford.