Page 1 of 1
1965 f100 90% complete
Posted: October 12, 2014, 8:25 pm
by stswartz
Here is a picture from the first road test as a complete truck. 6cyl 240 cid with clifford 6=8 package. Power brakes, front disk and classic air was added everything else standard. 3 yrs to this point for a total frame off restoration
Re: 1965 f100 90% complete
Posted: October 12, 2014, 9:38 pm
by jkimbrel65
Looking good Steve Might have to ride down and look in person
Mike
Re: 1965 f100 90% complete
Posted: October 13, 2014, 8:32 am
by unibody madness
That is a pretty truck.
How do you like the 6=8, and how did you run the water to the plenum?
Please post pictures of the engine compartment.
Re: 1965 f100 90% complete
Posted: October 13, 2014, 8:33 am
by F7BIGJOB
Very nice, Steve
Re: 1965 f100 90% complete
Posted: October 13, 2014, 9:54 am
by therealjoeshmoe
SAWEET!!!!!!!
Re: 1965 f100 90% complete
Posted: October 13, 2014, 2:16 pm
by Harper
love that color Steve. Where is springville compared to Coffeeville, al?
Re: 1965 f100 90% complete
Posted: October 13, 2014, 2:38 pm
by Mellvis
Very nice truck
Re: 1965 f100 90% complete
Posted: October 13, 2014, 5:37 pm
by stswartz
looks like a long way to Coffieville. Springville is 30 miles NE of Birmingham on I59
Here are pictures of the engine bay with the Clifford 6=8 package. I went with the straight forward coolant piping setup and it has worked well so far. I like the clifford package, and had the block worked according to cliffords spec during the rebuild which included resleeving the block. I have less than 100 miles on it so i haven't really hit hard yet. Plenty of bottom end torque. Wanting to get it on the interstate to see how it cruses. I have 3.0 rear end with a warner T-18 transmission
Re: 1965 f100 90% complete
Posted: October 13, 2014, 8:24 pm
by skidoorulz
Nice job!