Page 1 of 1
ford steel wheels
Posted: February 21, 2015, 8:41 pm
by bigmcgiv
So im going with steel wheel on my project. Wanting to know if i can squeeze a bullet cap between the hub and wheel. Trying to keep it low buck. I would love a set of bottle caps. Im looking for options. Thanks
Re: ford steel wheels
Posted: February 21, 2015, 8:53 pm
by cars2cool
The bottle cap hub caps are being reproduced, I'm sure somebody will chime in and tell you who has the best price on them.
Re: ford steel wheels
Posted: February 22, 2015, 2:23 pm
by bigmcgiv
Will a pop through bullet cap fit between the hub an wheel.
Re: ford steel wheels
Posted: February 24, 2015, 7:55 am
by shocker998md
They will, my truck has them. I think I got them off ebay four years ago. When I swapped to disks in the front though they aren't fitting against the hub right though so I need to figure something out about that.
Re: ford steel wheels
Posted: February 24, 2015, 5:35 pm
by The Big M
There are spider caps for the 5 on 5.5 lug pattern available now. It's obviously a more expensive solution but might be worth a look.
Re: ford steel wheels
Posted: February 24, 2015, 9:09 pm
by Truckrat
The ''Bottle Cap'' hub caps are available from LMC trucks for $29.95 each in polished stainless.
Just checked my latest catalog to be sure. Do you have the ''innie'' wheel centers or the
''outie'' centers? These were made for the ''innie'' centered Ford truck wheels. I am not
aware if any were made for an ''outie'' style wheel. Never have seen any made for ''outies''
in the ''Bottle Cap'' style. TR
