Page 1 of 1
Body to frame mount
Posted: March 22, 2015, 8:19 pm
by diehardfordtruck
Does anyone know the correct thickness of the rubber pads between the frame and bed on the unibody? Also how about the distance between rear springs center to center? thanks Charles
Re: Body to frame mount
Posted: March 22, 2015, 9:40 pm
by JOSHF100
On my truck the pads were 1/2 inch thick, nylon reinforced rubber.
I can check the distance between the springs tomorrow......
If no one posts before then.
Randall
Re: Body to frame mount
Posted: March 23, 2015, 8:00 pm
by JOSHF100
40" center to center on the springs, measured at both sets of hangers.
Randall
Re: Body to frame mount
Posted: March 26, 2015, 6:40 pm
by diehardfordtruck
Thanks, i appreciate it