Page 1 of 1

Anyone know where i can get a 62-62 restored aluminum grille

Posted: April 12, 2015, 10:40 pm
by panheadchuck
Im looking for a really nice used or a restored aluminum grille for a 62-63. any help would be great. Im trying to get truck ready for a show next month, but it seems like this is the impossible to find grille? i have a 61 but like the 62-63 better. Any help would be great

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 12, 2015, 10:41 pm
by panheadchuck
I have a core to send if needed .

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 12, 2015, 11:38 pm
by foodstick
Panhead, I think the fancy 62-63 grills are chrome, The aluminum ones started in 64....and they dropped the factory chrome ones after the aluminum started. Hope I recall that right.

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 13, 2015, 6:55 am
by 6166 Junkyard Dog
62 was the first year for aluminum and 63 was also aluminum,, on the 62 I have seen 2 different aluminum grills where in the nose piece was different One I saw was NOS @ a swap meet And was OK but because the way Ford wrapped it with a wire band it scratched it in the wrapper, I was the first one to take it out of the wrapper so I had to pass on that and that was 7 years ago , never saw another one again that was NOS

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 13, 2015, 11:34 am
by LM14
My uni came with the brite aluminum grill. Seems to be pretty fragile around the mounting tabs.

My research on getting something like this restored and dipped was that there were several places that cold restore it's shape but only a few places left in the country that could actually do the brite dip. Almost everyone I talked to farmed out their brite dip process. Several wanted to restore it, polish then coat with clear coat. That's what a lot are doing now. They admitted it doesn't look like the factory grill but it was the best they could do. Tends to make the grill look milky. The true brite dip process apparently uses some fairly nasty chemicals and EPA has killed off most shops.

SPark

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 13, 2015, 7:34 pm
by ICEMAN6166
only chromed metal grilles i have ever seen were 61s.

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 13, 2015, 9:29 pm
by slick4x4
ICEMAN6166 wrote:only chromed metal grilles i have ever seen were 61s.
Think hard grasshopper .....

You leaned up against my 62 at SlickStock ....
Even though the body is rough... The chrome grill is in good shape

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 13, 2015, 11:52 pm
by ICEMAN6166
did i lean on it before or after beer consumption...

could have been a mid year change

this one was aluminium, i would have saved it had it been in better shape

Image

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 14, 2015, 7:34 am
by slick4x4
ICEMAN6166 wrote:did i lean on it before or after beer consumption...
I got there pretty early in the day....
Probably after :burp:

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 14, 2015, 9:20 am
by theastronaut
If you find a decent used grill you can have it restored. King of Trim restored all of the aluminum trim on the '66 we restored including the grill. They strip, straighten, buff, and bright dip anodize the aluminum trim so that it looks better than new.

http://kingoftrim.com/

Image

Image

Image

Image

Image

Image

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 17, 2015, 2:34 pm
by Hunter's 64

Re: Anyone know where i can get a 62-62 restored aluminum gr

Posted: April 17, 2015, 6:40 pm
by Toyz
This guy seems a little bit out of bounds, IMO, both on his pricing and descriptions. Only redeeming factor I see, is that for those going to Pate, he's right down the road. If those prices prevail, it may well be time for me to shed some inventory!
Paul