Slick 60's

What are the differences between the 61 f100 suspension and frame versus the 61 f250 suspension and frame?

Typically, the 3/4T will have slightly different height/width/material thickness on the frame, heavier springs ....but surprisingly, the front axle itself is the same, BUT everything outboard of the kingpin is heavier.....

Curious what it is you're trying to determine?

James

Was thinking about a snowplow for the 62 f100 4wd. Other than that, I don’t expect any other heavy duty use. Was wondering if I should add to the suspension? Such as additional leaf or if the 3/4 ton springs would fit on the f100 frame.

I would hang the plow on there & measure how much it lowers it
If it's more than you desire
An additional leaf or 2 should stiffen it up enough to be suitable

These Slicks don’t die....they just need a purpose.

624WD wrote:These Slicks don’t die....they just need a purpose.

I'm trying

Ha! You’re not trying hard enough. You need more to add to your fleet.

There's a few more around here

show off!!! you ought to let me have that F350 9 footer Pat...

Ive got a spare 9' bed