PCV hardware

unibody madness · Post by **unibody madness** » March 30, 2019, 6:06 pm

Anyone out there with a 223 rusting away, or swapping engines? I need the a short section of pipe,(about 2 inches) with the female nut that screws on to the original positive crankcase valve, usually bolted to the exhaust manifold.
Thanks
John

slick4x4 · Post by **slick4x4** » March 30, 2019, 10:21 pm

Not exactly sure what your describing

Is it in one of these pics ?

unibody madness · Post by **unibody madness** » March 31, 2019, 12:25 am

Heck ya. the top picture #6758 the female nut on the tube, left hand side. to the left of the mounting bracket that screws on
to #6A666.
If you have one with two inches of the tube plus the flair please let me know

slick4x4 · Post by **slick4x4** » March 31, 2019, 9:26 am

I can look ....
But from the pic, it looks like a common plumbing flare nut
ACE hardware or Tru-Value carry that
I'm sure copper pipe would suffice

unibody madness · Post by **unibody madness** » March 31, 2019, 9:43 am

Thanks Pat, my Ace just re-opened after the fire, I will run up there and see what they got that fits

PCV hardware

PCV hardware

Re: PCV hardware

Re: PCV hardware

Re: PCV hardware

Re: PCV hardware