A pillar hole plug
-
- Posts: 16
- Joined: December 3, 2006, 11:49 am
A pillar hole plug
Is there a replacement plug for the hole behind the dash in the A pillar, kinda behind the ignition switch?
-
- Posts: 643
- Joined: August 3, 2006, 3:45 pm
- Location: Ramara Ontario
Re: A pillar hole plug
not exactly sure where you mean by A pillar
Slicks rule
dd/ 19 F150,97 Tbird
62 swb bbw uni next project
460 C6
Ken
dd/ 19 F150,97 Tbird
62 swb bbw uni next project
460 C6
Ken
Re: A pillar hole plug
Are you talking about the hole at the bottom of the windshield post that you have to stick your head thru the gauge opening to see it. If that's the one you're talking about it has a rolled edge so the answer would be no.
Re: A pillar hole plug
That hole is for the wiring from the dash to either the gas tank level sensor or dome light, both at the back of the cab.
Steve F
1965 Mustang Coupe
1966 F-100 Shortbed CC/Ranger
2010 Mustang GT Convertible
2010 Shelby GT500 Convertible
1965 Mustang Coupe
1966 F-100 Shortbed CC/Ranger
2010 Mustang GT Convertible
2010 Shelby GT500 Convertible
-
- Posts: 16
- Joined: December 3, 2006, 11:49 am
Re: A pillar hole plug
Yes that’s the one and it does have a rolled edge. From the reply below appears to be for wires. Thanks a bunch for this info, it helps greatly!grump wrote:Are you talking about the hole at the bottom of the windshield post that you have to stick your head thru the gauge opening to see it. If that's the one you're talking about it has a rolled edge so the answer would be no.