Page 1 of 1
Fasteners for door emblems
Posted: July 25, 2022, 4:59 pm
by My wife's nightmare
I'm looking for the inserts that hold the "Custom Cab" emblems in the doors. I have emblems but there was no attaching hardware with them.
Thanks for any help y'all can provide!
Re: Fasteners for door emblems
Posted: July 25, 2022, 5:51 pm
by longcabjohn
They are called barrel nuts. When I had a body Shop, I got them in a assortment of sizes but could be bought in 1 size packages . If you have access to an old shop
pre 2000 they might have some .
Johnny
Re: Fasteners for door emblems
Posted: July 25, 2022, 5:54 pm
by FarmMotorSports
Barrel nuts , barrel clips depending on who is labling them. Some of the older parts stores will have them. Older body shops should have them. Otherwise LMC, Amazon, or ebay. Get new, dont fool with old ones... Been there done that...
Re: Fasteners for door emblems
Posted: September 24, 2022, 6:42 pm
by My wife's nightmare
I realize I wasn't clear in what I was asking about the retainers. I was wanting to know what hole size they used because I've seen 5/32", 1/4" etc. Got a bag of 20 from NAPA. They had to order them but were in the next day. All worked out just fine. Thanks for the replies!