cummins motor in a slick
- greythorn3
- Posts: 107
- Joined: September 26, 2007, 12:49 am
- Location: anchorage alaska
- Contact:
cummins motor in a slick
Some one is starting a secret project on here that invloves a 65 crew cab and a 12v cummins!!!! cant waiT!! been thinking about it all week!! post up show us the goods!!
wheelordie.com my alaska offroad website
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
I have the same project in the works With a 65 Crew......
I'm upgrading the drivetrain to 1990 Axles and an NV4500 Tranny
It will be my tow rig when Done, and occasionally Tow the 65 Flareside Shorty to Shows.....
I'm upgrading the drivetrain to 1990 Axles and an NV4500 Tranny
It will be my tow rig when Done, and occasionally Tow the 65 Flareside Shorty to Shows.....
Stable of Trucks.....
61 3/4 ton 4x4..312v8,4speed Daily driver.
64 1/2ton C.C. 292v8,3sp,...???? 82k orig.miles
65 1/2ton flareside parts truck
64 1/2ton Flareside currently 4x4.going to be 472 powered Gasser
65 SuperCab/Crewcab Cummins 1 ton Duelly Hi-Boy Project
61 3/4 ton 4x4..312v8,4speed Daily driver.
64 1/2ton C.C. 292v8,3sp,...???? 82k orig.miles
65 1/2ton flareside parts truck
64 1/2ton Flareside currently 4x4.going to be 472 powered Gasser
65 SuperCab/Crewcab Cummins 1 ton Duelly Hi-Boy Project
- Johnny Canuck
- Posts: 8288
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.
- 64fordf100292v8
- Posts: 150
- Joined: July 20, 2006, 6:34 pm
- Location: Billings, MT
I'm lookin for a 4BT to put in my '66 Merc 2wd crew. Dan, give us some details on the swap, parts etc.
I'll prolly put my other '65 Crew on a cummins chassis.
-Shiny
I'll prolly put my other '65 Crew on a cummins chassis.
-Shiny
every movie I've seen the bad guy in the Camaro outruns the cop in the Crown Vic everytime!
'66 Merc "Crewlcab", SWB, clipped, c-notched etc
'65 Merc extra-cab,soon to be 3/4ton 4x4 SWBSOLD
'66 Merc J-Lo and Redford movie truck, from the movie "an unfinished life"
'66 Merc Crew Cab project 4x4 Cummins!
'65 Chevy crew cab
'66 Merc "Crewlcab", SWB, clipped, c-notched etc
'65 Merc extra-cab,soon to be 3/4ton 4x4 SWBSOLD
'66 Merc J-Lo and Redford movie truck, from the movie "an unfinished life"
'66 Merc Crew Cab project 4x4 Cummins!
'65 Chevy crew cab
-
- Posts: 335
- Joined: August 26, 2008, 2:24 pm
- Location: Sacramento, California
Thunderboy wrote:Just curious - What type of vehicle has a 4 cylinder Cummins B-series? That would be a very nice fit in a slick!
Drew
Check this out....
Very cool bumpside!
http://www.4btswaps.com/forum/showthread.php?t=3300
-Shiny
every movie I've seen the bad guy in the Camaro outruns the cop in the Crown Vic everytime!
'66 Merc "Crewlcab", SWB, clipped, c-notched etc
'65 Merc extra-cab,soon to be 3/4ton 4x4 SWBSOLD
'66 Merc J-Lo and Redford movie truck, from the movie "an unfinished life"
'66 Merc Crew Cab project 4x4 Cummins!
'65 Chevy crew cab
'66 Merc "Crewlcab", SWB, clipped, c-notched etc
'65 Merc extra-cab,soon to be 3/4ton 4x4 SWBSOLD
'66 Merc J-Lo and Redford movie truck, from the movie "an unfinished life"
'66 Merc Crew Cab project 4x4 Cummins!
'65 Chevy crew cab
- 64fordf100292v8
- Posts: 150
- Joined: July 20, 2006, 6:34 pm
- Location: Billings, MT
Shiny wrote:I'm lookin for a 4BT to put in my '66 Merc 2wd crew. Dan, give us some details on the swap, parts etc.
I'll prolly put my other '65 Crew on a cummins chassis.
-Shiny
The 4BT's came in Frito Lay trucks, Bread trucks and Some UPS trucks to name a few.
Mine is a 105HP non-intercooled version that came out of a ford chassis delivery van. Ill be using a Ford smallblock bellhousing adpater and a NP435 trans with a Advance Adpaters Ranger overdrive in front of the transmission. This will give me 8 forward gears and 2 reverse. I am going to use late 80's early 90's 300 six motor mounts and build my own brackets for the frame and engine.
I converted my truck to an F250 to help support the added weight up front and extra torque out back.
I am going to put the engine in with no mods and drive it first then make modifications for more power such as adding an intercooler, different turbo and tweaking the pump and injectors.
As I mentioned earlier I would like to start on it within the next month and I will take pictures as I go.
Re: cummins motor in a slick
Any updates on any of these? My blown out knee has kept me from starting on my Cummins / Slick Crewcab swap
-Shiny
-Shiny
every movie I've seen the bad guy in the Camaro outruns the cop in the Crown Vic everytime!
'66 Merc "Crewlcab", SWB, clipped, c-notched etc
'65 Merc extra-cab,soon to be 3/4ton 4x4 SWBSOLD
'66 Merc J-Lo and Redford movie truck, from the movie "an unfinished life"
'66 Merc Crew Cab project 4x4 Cummins!
'65 Chevy crew cab
'66 Merc "Crewlcab", SWB, clipped, c-notched etc
'65 Merc extra-cab,soon to be 3/4ton 4x4 SWBSOLD
'66 Merc J-Lo and Redford movie truck, from the movie "an unfinished life"
'66 Merc Crew Cab project 4x4 Cummins!
'65 Chevy crew cab
Re: cummins motor in a slick
I would love to see some done too. I'm going to put a 12v 6 cylinder in my 63 crew cab. Going to make it into a short bed 4x4 with 3/4 ton suspension. I was going to put a 4bt and 2wd but my friend put one in his gmc and couldn't pull as much as I need to. Gets good mileage though!