My 1966 F100 Restoration
Been a long time since I updated this thread on this site so here it goes. Made alot of progress since my last post.
Got all the 50+ rivets out of the frame and all the cross members, cab mounts, etc taken out of the frame. I left one cross member intact to help keep the frame more rigid. I will remove it once I get the other cross members bolted back in. Used in a air hammer and chiseled the heads off then hammered the rivets the rest of the way through. Had to use a grinder on most of them after the heads were popped off. Alotta work getting them off but it will be worth it knowing every aspect of this frame was sandblasted of all its rust and restored.
Got all the 50+ rivets out of the frame and all the cross members, cab mounts, etc taken out of the frame. I left one cross member intact to help keep the frame more rigid. I will remove it once I get the other cross members bolted back in. Used in a air hammer and chiseled the heads off then hammered the rivets the rest of the way through. Had to use a grinder on most of them after the heads were popped off. Alotta work getting them off but it will be worth it knowing every aspect of this frame was sandblasted of all its rust and restored.
I have been doing alot of research on what engine im going to put in my truck and after alot of thinking and planning I have changed my mind on the engine combo. I decided to go big block, the biggest v8 ever made in the factory, the 500 ci Cadillac. I bought this engine rebuilt for $800 and I will be tearing it down, going through it, making some adjustments, and buying some aftermarket parts for it too. The hard part is done and saved me alot of money too. The engine was rebuilt in 94' and never ran, the owner passed away before he could pick it up. Just in stock form these engines made a ton of torque and im hoping after some modifications I can make quite a bit more. 400hp/500lbs of torque can be had pretty easily and all within 3k rpm for the TQ numbers and around 4k rpm for the HP numbers. Cant wait till I get a rolling chassis and can start building this monster.
And here it is in flat black. Kirker SS Hot Rod black (flat black), used the Devilbiss Plus gun with a 1.4 tip for the paint. No runs and I put on 4 dry/medium coats to help achieve the flat black look. Turned out pretty good, cant wait to see it under real light to really see how it turned out. I know in some of the pics it looks like it didnt cover all the way but its just the way the light is reflecting from the camera.
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW
Boy !, didn`t you ever pull that baby to bits!, it`s looking great, I`m just a tad ahead of you in the put the chassis back together stakes but I think you are doing a more thorough job!, keep the pic`s coming
Last edited by Alan Mclennan on October 24, 2009, 4:21 pm, edited 1 time in total.
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
Alan Mclennan wrote::shock: Boy !, didn`t you ever pull that baby to bits!, it`s looking great, I`m just a tad ahead of you in the put the chassis back together stakes but I think you are doing a more thorough job!, keep the pic`s coming
Haha thanks Alan. I cant wait to start putting it back together but im not too excited about buying that many bolts lol wont be cheap but it will be worth it. I want to get the frame put back together as far as all the former rivoted pieces by the end of October/1st wk of Novemeber so im right on schedule so far. Should be fun.