After I replaced linkage parts and motor mounts I started thinking, (what else would cause this problem?). So I decided to look at the shifter and where it was connected inside the steering column. What I found is that the shifting tube was broken/wore out where tube and the shifting lever meet. So ...

OK, I left him a message

Thanks, do you have a phone number for him?

Who in the Phoenix-Scottsdale-Mesa are can help me with my transmission? Its a 1964 F100 3 on the tree. It jumps out of 1st when you start off. Reverse works OK. Wont shift into 2nd or 3rd. We tried to replace mounts and replaced some shifting linkage parts but no luck. I need to take it to someone ...

Thanks for the ideas. We checked the mounts and replaced some linkage parts today. Reverse still works good. Pops out of 1st and we cant get 2nd or 3rd.

We are going to seek professional help. Do you know anyone in Arizona that can help?

Thanks

We have a 1964 F100 and the transmission started jumping out of 1st. We have re-adjusted the linkage and the clutch is good if that matters. We thought we had the problem solved and then the truck started to get stuck in forward and reverse gear. So we adjusted the linkage again. Now it is jumping o...

............

..............

........

.......

Thank you very much for all that information

just in case you don't know-NEW y cams should get NEW solid lifters when you install a new cam. beware of Chinese lifters-they will disintegrate. = bad. I say this also cause Y speed parts aren't inexpensive. I have an Isky 300 in my 292 stroker which is in my 55 bird. Other stuff done to it, you c...

We have the 292 in our F100 and we are about to have the heads re-done. While were in there I wanted to know if anyone could recommend a nice cam and timing chain and gear set that they have had luck with. Were lookin for something a little more than stock.

Thanks

...............

............

...................

[..............

.........

................

Thanks, I'll try that.