240-6 camshaft

furnitureguy-123 · Post by **furnitureguy-123** » August 23, 2009, 8:16 pm

Does anyone know where I can buy a NEW,STOCK cam for my 68 240?
I would also like a new cam gear as well.
Also who makes the best rod and crank bearings?

Tanks!!!

Anthony · Post by **Anthony** » August 23, 2009, 9:07 pm

http://www.napaonline.com/MasterPages/N ... &VehCode=Y

I looked this up using a '68 f-100 with the 3.9 240. I always try napa first then advance, auto zone. These are the 3 local auto parts stores around me. you should be able to get one from summit or jeggs also. hope this helps..... Anthony

fmartin_gila · Post by **fmartin_gila** » August 24, 2009, 8:05 am

If all else fails, try Egge and Kantor.

Fred

Falcon Interceptor · Post by **Falcon Interceptor** » August 24, 2009, 9:37 am

http://www.northernautoparts.com/Produc ... elId=19239

Ford 240 1967-1974 Cam Kit $136.77

Includes:

* Federal Mogul stock style Camshaft
* Federal Mogul stock style Lifters
* Melling stock style Timing set

I usually check northern auto if I'm looking for the cheapest

furnitureguy-123 · Post by **furnitureguy-123** » August 24, 2009, 1:40 pm

Thanks to all for the info. I will try all of the above.

Von Dud · Post by **Von Dud** » August 25, 2009, 4:38 pm

these folks have really solid products developed for inlines, if you want to take it up a notch: http://cliffordperformance.net/

i've been real happy with their upgrades and service. (their 240cid parts are under the "300" tab).

good luck!