1964 3 speed gearbox, need oil seals

The Bird · Post by **The Bird** » March 28, 2010, 4:31 pm

Does anyone know where I can buy an oil seal kit for the 1964 F100 3 speed gearbox?

Thanks

winr · Post by **winr** » March 28, 2010, 7:51 pm

Hey The Bird.

I bought a gasket set for my 1965 3 speed 3.03 top loader.

Does your trans have a tin plate on top or a plate on the drivers side with the shift levers ??

Ricky.

The Bird · Post by **The Bird** » March 28, 2010, 8:53 pm

Shift levers on the drivers side

The Bird · Post by **The Bird** » March 28, 2010, 9:09 pm

I have oil leaking from both shift lever shafts and the rear of the trans where the driveline connects. The truck has been sitting for 10 years+ and I think the seals are dried out and need replaced. I looked for a kit to replace all the trans seals and so far I havent found anything.

winr · Post by **winr** » March 28, 2010, 10:18 pm

Hey TB.

Look like this ??

http://www.fordification.com/tech/image ... g_T87C.jpg

Ricky.

The Bird · Post by **The Bird** » March 29, 2010, 12:01 am

Exactly!

64 f100 · Post by **64 f100** » March 29, 2010, 5:20 am

Front and rear seals should be available from your local parts store, and the shift fork seals are o-rings I believe.

Rich

The Bird · Post by **The Bird** » March 29, 2010, 7:43 pm

Thanks, I'll try that.