Page 2 of 2
Posted: October 4, 2011, 5:32 pm
by Power by Ford
Thanks Not sure of the drop I just eye balled it when I set up the ride height. It is 2 foot off the floor at both the front and rear fender wells and 10 inches at the middle of the rocker. I did tub the wheel wells 4 inches as the rear is a 315x50
Posted: October 4, 2011, 5:43 pm
by Tigger!
Dam that's what I was trying to avoid.
Re: Slicks out there with 20" and 18" wheels/rims
Posted: October 4, 2011, 6:00 pm
by BackyardRest
Tigger! wrote:Does anybody out there have a slick with 20" wheels/rims? I'm debting on if I should put 20" or 18" wheels/rims on my 64.
Please send pics!
Thanks
I had planned on steel wheels for my build but they will not allow proper offset in front to clear the brakes. Only way to do that is go with a 18" wheel.
As others have said if the truck sits right it should look fine. IMO think 20's are a bit big.
I have a brand new set of GT500 KR Tires in the sticky compound so thats whats going on mine
285/40x18 in rear and 255/45x18 in front.
Goodyear SuperCar Tires (KR only)