Page 1 of 1
Clutch Equalizer Bar. *No longer needed
Posted: January 4, 2019, 12:18 am
by 64shortbed
Looking to purchase a clutch equalizer bar from someone willing to part with one. I'm not certain to how specific these are to each application, but I have a '64 f100 with a 262 I6. Mine has suffered a catastrophic failure.
Re: Clutch Equalizer Bar
Posted: January 4, 2019, 4:19 pm
by charliemccraney
You're probably missing the bronze bushings, too.
I had that exact same thing happen. The bushings were missing so the steel wore through and split just like that.
Re: Clutch Equalizer Bar
Posted: January 4, 2019, 10:44 pm
by 64shortbed
The bronze bushings were still in there, the metal just tore for some reason. A friend repaired it this evening. We were looking for a piece of steel tubing to slip over the end to reinforce it, but couldn't find the right size. We'll see how it holds up...
Re: Clutch Equalizer Bar. *No longer needed
Posted: January 30, 2019, 1:43 pm
by unibody madness
Don, what year and motor. I have very iffy internet right now or I would look it up. Not sure if year and Motor size make a difference but PM me and be patient if you are still in need
