Slick 60's

Anyone out there with a 223 rusting away, or swapping engines? I need the a short section of pipe,(about 2 inches) with the female nut that screws on to the original positive crankcase valve, usually bolted to the exhaust manifold.
Thanks
John

Not exactly sure what your describing

Is it in one of these pics ?

Heck ya. the top picture #6758 the female nut on the tube, left hand side. to the left of the mounting bracket that screws on
to #6A666.
If you have one with two inches of the tube plus the flair please let me know

I can look ....
But from the pic, it looks like a common plumbing flare nut
ACE hardware or Tru-Value carry that
I'm sure copper pipe would suffice

Thanks Pat, my Ace just re-opened after the fire, I will run up there and see what they got that fits