Thank you from New York
Thank you from New York
From upstate New York I would like to say what a wonderful site with a bunch load of information. I'm building a father son 66 F100 project with my son and with access to your site we have installed a 460 engine in it as well as power steering from a 79 F100 from all the information found on your site. Was just accepted to your site, with that being said, again thank you, I had just ordered new cab bushings for the cab and core support as we are having trouble trying to get the firewall plate that holds steering column to line up in bolt holes and to strap column firmly to firewall, the column is from a 72 F150 cant remember if it had power steering or not. Maybe when bushings get here that will solve problem and we can keep building. Thanks to a wonderful site and to some GREAT knowledge out there.
- ThinLizzy13
- Posts: 763
- Joined: October 5, 2012, 5:29 am
- Location: Catskills NY
Re: Thank you from New York
Iowa says HI ! welcome aboard...
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: Thank you from New York
welcome from SE Utah
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: Thank you from New York
F. R. O. M.
K A N S A S
K A N S A S
.
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Re: Thank you from New York
Welcome to the Brotherhood of the Addicted.....(Addicted to the trucks that is) from Oregon. Always room for one more...............
-
- Posts: 579
- Joined: December 31, 2009, 5:26 pm
- Location: Saint George Utah
Re: Thank you from New York
Ditto from the northern end of the Mohave. To fit the column, be sure the cab is lined up, remove the dash clamp, install the flexible joint, firewall plate and boot (loosely), then re-install the dash clamp and tighten all the bolts. Check for binding. You can shim the steering gear box between the frame and box but usually this is not necessary. Sawsall gets the old bushings out in short order. Don't over tighten the new bolts. Drain the fuel tank before you move it too get to the top end of the rear cab mount bolts.
William-in-St. George
-
- Posts: 32
- Joined: July 6, 2012, 6:49 pm
- Location: Central Bridge, New York
Re: Thank you from New York
From up state New york in coblesskill
Re: Thank you from New York
Welcome from Phoenix.
Kevin
Kevin
kstones63
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
-
- Posts: 932
- Joined: January 10, 2011, 4:58 pm
- Location: High Springs Florida
Re: Thank you from New York
From Sunny Florida
Doing a Father / Son project also.
Danny
Doing a Father / Son project also.
Danny