292 Rocker Question

Rusted64 · Post by **Rusted64** » July 13, 2011, 11:28 am

This question is for those who have rebuilt the 292 engine.

What end do the oil outlet tube go on for the rockers?

I have the manual but it is a little confusing.

I am thinking that one goes to the front so the oil would flow to the back, and the other goes toward the back, just not sure.

I dont trust the previous assembly, as I had 3 number 5 pistons along with other odd things.

Thanks,

Teros292 · Post by **Teros292** » July 13, 2011, 11:52 am

Oil outlet tubes are in front on passenger side (#1 cylinder) and in rear on driver side (#8 cylinder).

Rusted64 · Post by **Rusted64** » July 14, 2011, 12:26 pm

I knew this was an easy one for someone on here.

Thank!