need information on a 64 f250
need information on a 64 f250
i have a 64 f250, it has a 292 v8 with a 4 speed. i was told it ws a camper special.
does anyone have any information on these, like how many were made and where i can find parts.
ebay has been pretty useless and the local parts are mostly a lot worse than what i'm trying to replace
[albumimg]9273[/albumimg][/img]
does anyone have any information on these, like how many were made and where i can find parts.
ebay has been pretty useless and the local parts are mostly a lot worse than what i'm trying to replace
[albumimg]9273[/albumimg][/img]
Welcome to Slick 60s.
A few excellent parts sources are right here;
http://fordtruk.com/forums/viewforum.php?f=6
http://fordtruk.com/forums/viewforum.php?f=9
Tom here sells new & used parts and you get exactly what he tells you are getting quality wise.
http://flashbackf100s.com/
Depending on what you need Pete is back up & around somewhat.
http://fordtruk.com/forums/profile.php? ... ile&u=1458
And of course there is his "High Slickness" - the Iceman (Brian)
http://fordtruk.com/forums/profile.php? ... ofile&u=26
There are some very knowledgeable people in this forum - we probably know more about these trucks than Ford does, lol.
A few excellent parts sources are right here;
http://fordtruk.com/forums/viewforum.php?f=6
http://fordtruk.com/forums/viewforum.php?f=9
Tom here sells new & used parts and you get exactly what he tells you are getting quality wise.
http://flashbackf100s.com/
Depending on what you need Pete is back up & around somewhat.
http://fordtruk.com/forums/profile.php? ... ile&u=1458
And of course there is his "High Slickness" - the Iceman (Brian)
http://fordtruk.com/forums/profile.php? ... ofile&u=26
There are some very knowledgeable people in this forum - we probably know more about these trucks than Ford does, lol.
Last edited by Greg D on September 18, 2011, 11:36 am, edited 3 times in total.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Hey Ferg, Welcome. Looks like we share the same nickname..
here are production numbers. Here is the place to get your parts more/less. If someone here doesn't have them for sale, they will steer you the right way as to where to get them.
here are production numbers. Here is the place to get your parts more/less. If someone here doesn't have them for sale, they will steer you the right way as to where to get them.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
- Uncle Skip
- Posts: 4695
- Joined: July 15, 2006, 8:30 pm
- Location: Pearland, Texas

- ezernut9mm
- Posts: 9141
- Joined: July 21, 2006, 9:37 pm
- Location: KCMO

welcome to the show ferg. i'm sure someone here can help with parts. rust free hoods are getting hard to find though. one tip is to start looking at the big trucks. they usually have less miles and better sheet metal.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
-
factorystock
- Posts: 440
- Joined: December 31, 2007, 5:42 pm
- Location: westcoast
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW

Welcome Ferg!, do you have any more pic`s yet?,
Yeah Johnno!, your name is Fergo!
Uncle Skip wrote:"Hey Ferg, Welcome. Looks like we share the same nickname.."
No way Canuk.
Your nickname is Fergo.
Ferg, welcome from sunny southeast Texas.
Uncle Skip
Yeah Johnno!, your name is Fergo!
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
i've got most of the body work finished up but have to wait for the weather to clear up before i get more pictures, hopefully before the end of the week. garage is way too small for that old tank.
i got the hood fixed and the rust knocked down and smoothed out, waiting on some parts from lmc trucks to finish it up and then get some paint on it before the snow starts.
i am wondering how many camper specials were made and if they had any special parts, paint, or badges. i'm trying to get it back close to stock other than the camper top, i really do not like those things. also i've got a tool box in the passenger bedside, is that special order or just part of the package?
i got the hood fixed and the rust knocked down and smoothed out, waiting on some parts from lmc trucks to finish it up and then get some paint on it before the snow starts.
i am wondering how many camper specials were made and if they had any special parts, paint, or badges. i'm trying to get it back close to stock other than the camper top, i really do not like those things. also i've got a tool box in the passenger bedside, is that special order or just part of the package?
rust must be my favorite color, its on every car i own
-
62bigwindow
- Posts: 408
- Joined: December 27, 2009, 6:03 pm
- Location: durham missouri

-
factorystock
- Posts: 440
- Joined: December 31, 2007, 5:42 pm
- Location: westcoast
-
factorystock
- Posts: 440
- Joined: December 31, 2007, 5:42 pm
- Location: westcoast
