azratrods '64

azratrod · Post by **azratrod** » October 12, 2011, 6:34 am

thanks.

its maize yellow by hot rod flatz. it looks like a flat butterscotch.

the body is going to be maize yellow
the interior is going to be wimbelton white
the fire wall is going to be wimbelton white
the inner fenders are going to be flat black
the the entire front clip is going to be maize yellow
the grill will be rechromed

TheOPWK · Post by **TheOPWK** » October 16, 2011, 10:06 pm

Slow and Steady.
Kinda rushed the underside of the hood, so now im going to be running a bit slower when it comes to spraying the white.
Insides didnt need much work besides where people kick the door getting in. Left all the factory spot welds and such because I like seeing them there. Prevents the finished product from looking like a street rod.
One door done.

azratrod · Post by **azratrod** » October 17, 2011, 4:23 am

i just might kiss you tomorrow. damn my door looks good!

azratrod · Post by **azratrod** » October 17, 2011, 4:45 am

to my surprise opwk was painting today. the passenger door looks awsome buddy. in my defense i was working on the truck also. just somewhere else. i was with my uncles: bill w. and garbz. bill w. came up from tucson and we met up at garbz house. we gutted a parts cab and got it set onto my finished rolling chassis. we also got whats left of my bed set on the finished chassis as well. we are mocking the bed and cab on the frame so that we know where the hard fuel lines need to go and we are going to be rebuilding the bed, raising the bed floor, putting a wooden bed floor in, and adding a unibed rear roll pan. be prepared to be blown away by whats to come!

TheOPWK · Post by **TheOPWK** » October 17, 2011, 1:19 pm

azratrod wrote:i just might kiss you tomorrow.

Ill punch you in the mouth. . . . .

fire truck · Post by **fire truck** » October 17, 2011, 9:26 pm

Bloody kiss? You boys out in AZ are into some wild snit....

Bill W · Post by **Bill W** » October 17, 2011, 11:29 pm

fire truck wrote:Bloody kiss? You boys out in AZ are into some wild snit....

your tellin me! it's always a hoot at Daves Pet Store!

DHP NM · Post by **DHP NM** » October 18, 2011, 10:51 pm

truck is coming out sick guys

TheOPWK · Post by **TheOPWK** » October 18, 2011, 11:34 pm

Thanks Alex.
Other door is done. Ran into a little snafu, sprayed sealer and instantly the damn door fish eyed everywhere. They say if you have a mistake while painting, stop, walk away, wait a day, then sand and retry. I opted or dousing the whole door in laquer thinner and wiping all that shit off. rather than set me back a day, it only set me back about 30 minutes.

Standard supplies. Slealer on the right, paint on the left, Banquet in the middle.

Taped, wax and grease removered ( i dont think thats a word),

Sealed

Paint

TheOPWK · Post by **TheOPWK** » October 18, 2011, 11:39 pm

Cave and pave. That's how that shit is going to get fixed.

Bill W · Post by **Bill W** » October 19, 2011, 12:04 am

Very nice paint work Scott!

Alan Mclennan · Post by **Alan Mclennan** » October 19, 2011, 2:01 am

Scott, that isn`t what happened when you left chat the other night is it?, nice recovery!

azratrod · Post by **azratrod** » October 19, 2011, 2:52 am

"cave and pave"? hell NO! i have a complete rear section thats in great shape, and a front wall thats in great shape as well. were going to cut everything off and reattach the good parts.

the 2nd door looks as awsome as the first. thanks buddy!

azratrod · Post by **azratrod** » October 26, 2011, 5:37 am

so to keep the newly painted parts safe ive gutted my dinning room and moved everything in there.

parts going into blitz black

the passenger door

the hood

azratrod · Post by **azratrod** » October 26, 2011, 7:35 pm

the yblock headers showed up from speedway finially. i think there going to get jet hotted in a gray color.

Alan Mclennan · Post by **Alan Mclennan** » October 26, 2011, 9:03 pm

they do a silver that almost looks like chrome in Jet Hot!, I had a set of Belond headers done for my flathead!, they looked great!

Bill W · Post by **Bill W** » November 8, 2011, 9:32 pm

where's the updates?

azratrod · Post by **azratrod** » November 9, 2011, 4:31 am

hitting it hard this weekend. getting the rams horns on and starting to mock up the exhaust. then the lakes pipes

azratrod · Post by **azratrod** » November 22, 2011, 5:27 am

got the drivers door back from scott. the wimbelton white on the interior looks awsome.

azratrod · Post by **azratrod** » November 22, 2011, 5:36 am

so the cab needed to be blasted a second time after having the rear big back window put in. plus there was some surface rust that popped up and some spots that needed attention. the cab is now at scotts and the body work is about to begin.

azratrods '64

painting

doors getting white paint

as of 10.16.2011

Re: doors getting white paint

as of 10.18.2011

keeping parts safe

we got head...ers

updates

drivers door in white

cabs second blasting