my pro-street slick

Adam · Post by **Adam** » February 18, 2010, 10:23 pm

my pro-street slick

Post by **Greg D** » February 18, 2010, 10:31 pm

WOW!
Nice ride you have there.
I have a question,
What is the purpose of the piece of red tape on the steering wheel?

Adam · Post by **Adam** » February 18, 2010, 10:33 pm

keeping wheels center at drag strip

slick4x4 · Post by **slick4x4** » February 18, 2010, 10:45 pm

hhmmmm....

not sure what to say about this truck...
how about...
N I C E , T R U C K !

and....

f r o m
K A N S A S

36truck · Post by **36truck** » February 18, 2010, 10:58 pm

Cool truck I think the Slick body style lends itself very well the race look.

from Michigan.

fire truck · Post by **fire truck** » February 18, 2010, 11:04 pm

Freekin sweet!!

Obsa · Post by **Obsa** » February 18, 2010, 11:25 pm

Nice!! What is your best time so far?

Hoofbeat Racer · Post by **Hoofbeat Racer** » February 19, 2010, 12:04 am

Very cool man. Welcome to the club. Your truck looks super clean. Tell us more, we're listening

zip · Post by **zip** » February 19, 2010, 1:46 am

Nice, nice and more nice.

Adam · Post by **Adam** » February 19, 2010, 2:35 am

thanks guys not real good with a computer so it may take me a little bit to get back to you guys. so anyway heres some more info on my 64. ive been working on it for about 7 years it has a mild 460 with stock 429 cj rods. stock 460 crank victor intake performer rpm heads out of the box and a 950 hp carb. im running a PA supercomp c 4 tranny with a brake and a 4500 converter. the motor made 620 hp and so far my best time has been 11.32 at 116. ive only made about 7 pases so it should have a little more left in it.

semotrucker · Post by **semotrucker** » February 19, 2010, 8:43 am

Wow...nice nice nice. Welcome to Slick60s from Southeast Missouri. Where are you located?

Cam

Adam · Post by **Adam** » February 19, 2010, 9:13 am

cam i live in oldtown maryland about 2 hours from washington D.C

BackyardRest · Post by **BackyardRest** » February 19, 2010, 11:28 am

Adam wrote:thanks guys not real good with a computer so it may take me a little bit to get back to you guys. so anyway heres some more info on my 64. ive been working on it for about 7 years it has a mild 460 with stock 429 cj rods. stock 460 crank victor intake performer rpm heads out of the box and a 950 hp carb. im running a PA supercomp c 4 tranny with a brake and a 4500 converter. the motor made 620 hp and so far my best time has been 11.32 at 116. ive only made about 7 pases so it should have a little more left in it.

Cool Truck! Pretty fast for a slick... What is your 60ft time? My engine should make around the same HP so am curious on your trucks weight?
I am hoping for similar or better MPH but traction most likely will not allow the ET. My goal is under 4000lbs but not sure If thats possible.

Adam · Post by **Adam** » February 19, 2010, 3:17 pm

my truck weighs 3727 with me in it. my 60 ft time on the 11.32 pass was 1.58 and 97.8 mph in the 1/8. the truck has some more left in it .in good air it should run in the 10.90 range i still havent changed any jets or air bleeds or timing. i have a 10 inch converter in it now and im running a 4.57 gear. and im having some problems getting the truck to hook. i"m in the process of building a 545 stroker. but thats probably a year or so away. need to get the bugs worked out first. I have some passes at the drag strip on video from this past year. It was in july and it was hot. I made 3 passes all 3 were in the 11.44range. If you want i can try and post it if i can.

adam

Alan Mclennan · Post by **Alan Mclennan** » February 19, 2010, 5:41 pm

from this side of the black stump!, that's a smick looking truck you have there!, I particularly like the inner guard treatment, but more pic`s please!

azratrod · Post by **azratrod** » February 19, 2010, 6:27 pm

i want a roll cage now

Adam · Post by **Adam** » February 19, 2010, 8:25 pm

alan thats a sweet 66 you have there. I use a tintable bed liner to get that look under the hood. spray it real thin and clear coat it. IT'S not hard to do and does not cost alot.

azratrod you also have a sweet ride and a roll cage for your truck would be easy. you can't buy one out of a book, you have to get it custom bent.
chris alston's chassisworks bent mine up and i have all the measurements you need if you want them.

adam

ezernut9mm · Post by **ezernut9mm** » February 19, 2010, 8:34 pm

that is tha tits man! i really like the color. very clean looking truck.

Adam · Post by **Adam** » February 19, 2010, 8:59 pm

ezernut9mm

thanks it's a factory ford color electric current red pearl met

adam

Reds Rod Shop · Post by **Reds Rod Shop** » February 19, 2010, 9:00 pm

Dude, thats a sweeeeeeeeeeet ride you have there. Does the roll bar go through the back of the cab?

my pro-street slick

my pro-street slick

my prostreet slick

my prostreet slick

Re: my prostreet slick

my prostreet slick

cage

my prostreet slick

my prostreet slick