here ya go........this link has some great wiring diagrams. http://www.tocmp.com/ cut and paste that, and don't push that button anymore,that trucks blue enough.

Hey Guys, going through the wire harnesses and tryin' to sort them out. like to get a new headlight switch and a new wiper blade switch along with the motor and arms. first things first headlight switch for a 63' ford f100 223 motor, any help would be great.


mark

.....my book here says it a Warner T85N 3-speed with overdrive , the question is will it bolt up to a 223 motor, says its got a few wires and an overdrive cable. thanks for any input....mark

got a chance to pick up a borg warner tranny wanted to know if the price was right says its a three speed with overdrive he's askin' 250.00 for itits out of a 66-71 i think he wrote. i'm gettin it for my 63 223 goint to the four speed i got in there now, got that granny gear.

mark

Hey guys, lookin' for a rear bumper for the 63, stepside, had some kind of wrap-around huge step bumper on it that kinda wraped around the rear of the rear fender, had to weight about 200 lbs. removed that, hell of a boat anchor, anyway lookin for a rear bumper, any ideas. thanks .


mark

pack it with ice......

seems to shift fine 2nd through 4th but at idel sittin' in the driveway clutch pedal fully depressed ....noway is it going to get first or reverse.....thx for your help.

got the bed in the garage today, what a pain that was. starting to cool off a little so i can work on it alittle.


mark

got a question, i have the 4 speed on the floor, and while running i cannot put it in reverse, think i'll need to drop the tran. and take a look at the clutch, or is there a throwout bearing, or am i any where close.


mark

good question......i couldn't get either, the installation of a picture.

that was the funniet story,i got tears in my eyes....my kid gets his lic. this Feb. i can't wait..........har, har....


mark

if you did the brakes , it is easyest to remove the cal. and put it in the vice and remove it that way. and put some brake fluid on it and let it set a dat...


mark

Welcome, this is a wealth of info here....


mark

....good info Dan, when i bought my 63 the guy had that rubber stopper turned around, and with your info should get that pedal down a little more....

mark

........thing is, ya can't drive it,...how do ya open the door too get in?


mark

did ya install turn brakes.....



mark

love to go.....run what ya brung, just to damm far.


mark

man.. this truck just comes right apart, rear fenders are off and the rear bumperis off rear bumperhas like a step on the side which has a contour of the back of the fender, bed is coming off tomarrow.take them fenders down and have some patches welded in there this weekend.still got to do that carb...

talk to Rod's carb. servicewants 150.00 for a new carb., looks like i'm going to be rebuildin' this one.....picked up the kit and floats for 40.00 hope this is easy....

...called Rod carb. repair wants a148.50 for the carb. picked up the rebuild kit for 44.38 with a can of carb cleaner,put the original carb back seem to run a little better, just can't get the thing to idle, i'll rebuild that carb this week and be all over it this weekend, got to drop that tranny so...

.......those look nice.....i got the ford dog bowls and chevy rings...64' 223 4 speed..... 63' 223 4speed here.


mark