Jim,
I could not get there with the link provided but was able to using the search people option on photobucket's home page.

Y'all have a good looking slick

Gary, There's a cleaner that's used on commerical equipment that works well. Don't know the name of it but its stout and works great on aluminum. We used it on construction equipment and it would remove the oxidized paint layer in about 10 minutes. Might check with a local truck or farm / constructi...

Have a couple of ford script wrenches in the shed.

Picked up a nice Ford script oil can and a naughty nellie from an old man a few years ago.
Kept the nellie and sold the oil can on eBay.

Bryon,

I have a complete 62 Fairlane 4 door that we will part out.
If you want PM me and I will send you our phone # and E-mail

Were near Jackson in west TN

I have had good luck just bolting the wheel or an old rim on loosely and useing it as a short stroke slide hammer. You can get a straight pull that way but get the nuts on a few turns so they dont pull the threads. Sounds tight though and like mentioned heat works wonders. Who knows someone might ha...

Great picture from the days of iron and steel.

Spent many years wrenching on equipment and allways enjoyed watching a skilled operator work.

Awww it will buff out with some 36 grit :lol: This was someones baby at one time but it sure is rotten now. But it has a couple of good points parts wise big block, wheel lift attachment, decent wheels and tires etc. Like I say try to get my cost back and make a boom trailer for my profit. It has a ...

Picked up this wrecker about a month ago figure on pulling the winchs/booms off and parting out the rest. Should be able to get my money back and have the makings of a handy boom trailer. These winches and booms have a hand crank feature on them or I could set up the winches with a small engine. Wit...

Wonder how some ''00'' grease would work.
Its fluid like and has EP additives etc in it

Here's to a great 4th of July Y'all

Driving thru Milan Tn yesterday and noticed a beautiful display of American flags set up for memorial day. It looked to be a grid of 50 flags set on a well maintained rolling church yard with the sun setting in the background thru thunderheads in the distance. The air was crisp and clean from a cold...

ezer, Hope this makes sense to you my discriptions are kinda funky sometimes. If it feels like the shift lever is in the shift forks correctly try pushing the lever over to reverse and see if it feels springy. My thoughts are it might be in reverse and if it feels solid and a bit short on travel it ...

Go for it Brian
You would be one up on those that only carry a spare tire

I found some of the comments there just as interesting as the pictures.
History is a great teacher.

The comment on the homemade lawn mower spoke volumes.

Thanks for posting this Phil it's a very interesting site.
I spent a couple of hours hopscotching around there this morning.

I cheated a little
Those and the B model's were our meat n taters when I started down at the JD dealer.

Those twisters sure can make a mess of things

Jason is that a 440 skidder in the second picture?

I found mounting the door latch striker last works well.
One less thing to hassle with when setting the door.

Never knew there were oversize pins :shock: But then again our local dealer guy hides when asked about parts that are older than he is. Sounds like a good way to go. There's room for a bushing in the hinge Big M but the pin and reamer sounds like the way to go. Y'all remember to tell folks not to sl...

Andrew, My wife said she can get the 800 customer service number to the company that has Devilbiss spray guns now if you need it. The compressor and spray equipment sides split years ago and ITW has the spray gun stuff last she heard. To make things confusing the air power (compressor) side of Devil...